• 0.0036" (3.6 mil) Thick Bag Film laminate constructed from multiple layers of aluminized polyester and polyethylene. Designed for moisture and electrostatic discharge (ESD) sensitive items (such as SMT). Meets ANSI/ESD S20.20, ANSI/ESD S541, EIA 541, JESD625-A, and EIA 583.
• <10 nJ Energy Penetration Tested per ANSI/ESD STM11.31. Protects contents from ESD charges and discharges. Meets the requirement for discharge shielding per Static Control Bag ANSI/ESD S11.4 Level 3.
• >20lb Puncture Strength Average. Provides physical protection for contents.
• Dissipative Inner and Outer Surfaces Rs 1 x 10⁴ to < 1 x 10¹¹ ohms per ANSI/ESD STM11.11. Allows bag to be grounded when placed on a grounded surface or handled by a grounded operator.
• Printed with ESD Protective Symbol and lot code information. Meets the requirements of ANSI/ESD S541 for quality control purposes.
• Lead-free RoHS 2, REACH and Conflict Minerals Compliant
• Made in the United States of America

This aluminized moisture barrier bag is designed to provide packaging for ESD and moisture sensitive items, both inside and outside an ESD protected area. The bags are heat sealable and suitable for vacuum packaging. Bags are printed with ESD and moisture warning symbols and a lot code for traceability.

SCS Moisture Barrier Bags Dri-Shield 2000 are manufactured from a laminate of multiple layers of aluminized polyester and polyethylene. Polyester provides puncture resistance. Metal layers are intended to provide shielding of Electrostatic Discharge (ESD) and to help minimize the penetration of electric field while providing moisture protection.